Skip to content

10 Best 3 Inch Roof Flashings Of 2022

A roof flashing is a metal or plastic sheeting that is used in roof construction to prevent water from seeping into the seams between two pieces of material. Roof flashings are commonly used around chimneys, dormers, and other protruding features on a roof.

Our Top Picks At A Glance

Here is a quick recap of our top 10 picks that lets you compare each item with another and allow you to choose the best one.

10 Best 3 Inch Roof Flashings People Love In 2022: In Depth Features

Bestseller No. 1
IPS CORPORATION 86249 Roof Flashing 3-in-1 with Elastomeric Collar, 3 x 12 x 15.4 inches, Steel
  • The roof flashing is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes
  • Constructed of a durable galvanized steel base to prevent rust and cracking
  • Features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather
  • Designed to direct water away from critical areas on the roof and prevent penetrations
  • Compatible with any roof pitch up to a 45-degree angle
Bestseller No. 2
Oatey 14193 Rain collar 3" No-Calk Roof Flashing
  • Use as a protective water shield (slides down over pipe)
  • No caulking needed
  • Do not use petroleum based products on rubber collars
  • Package Dimensions: 13.0" L x 10.0" W x 7.0" H
Bestseller No. 3
DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4" - 3")
  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack.
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD.
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7"
Bestseller No. 4
Cofair QR325 Quick-Roof Waterproof Repair, 3 Inches x 25 Feet
  • The product is 3 inches x25 feet roof repair
  • Easy and simple use kit. Just press in place for a permanent repair
  • The product is manufactured in china
  • Cofair Instant Waterproof Repair and Re-Roofing
  • Self-stick aluminum surface and Super reinforced
Bestseller No. 5
Oatey 12946 Standard Base Flashing, 3", Aluminium
  • Rustproof .032 stamped aluminum standard base
  • Non-fading sealing collar
  • Approved for Type B installations
  • Slides over pipe - for pitch to 40 degrees
  • Rustproof .032 stamped aluminum standard base
Bestseller No. 6
Zinc Metal Strip for Roof and Garden - 55 Feet x 2.5 Inches - Prevents Roofing Stains
  • Pure zinc strip roll: 55' long x 2.5 inches wide
  • Prevents ugly roof stains
  • Rust-resistant and anti-corrosive metal great for roofs, siding, shingles, planting and gardening
  • Zinc outdoor roofing flashing strips have a 20+ year lifespan
  • 99.8% zinc with a trace amount of copper for strength
Bestseller No. 7
Flashers #3 Black EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made In The USA
  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
Bestseller No. 8
Oatey 11871 No-Caulk Galvanized Steel Roof Flashing, 1.5" - 3" pipe diameter
  • The product is easy to use
  • The product is highly durable and handle
  • The product is manufactured in China
  • Slides over pipe. Type of base determines pitch
  • Non-fading, non-cracking and non-rusting bases and sealing collars
Bestseller No. 9
Flashers #3 Grey EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made in The USA
  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
Bestseller No. 10
LLPT Aluminum Butyl Tape 3 Inch x 16.5 Feet Hatch Cover Flashing Permanent Waterproof Leak Repair Tape for Boat Pipe RV Awning Roof Window Patch and Sealing (AB435)
  • FEATURES: LLPT Aluminum Butyl Tape is made of synthetic composited RUBBER with laminated aluminum foil cover instead of bitumen-based version for non-drying, non-hardening and extremely working temperature that provides easy installation, forming, molding, shock-absorbing, mess free, air tight sealing, waterproof, aging resistance, weatherproof, ultra violet resistance and high viscosity. Unlike asphalt based sealing tape, which is hard to apply at low temperature and aging faster outdoor.
  • APPLICATION: LLPT Aluminum Watertight Butyl Tape is ideal for sealing and patching on roof, boat, ship, window, toilet, tunnel, RV awning, gutters, mobile homes, down spouts, watercrafts, canoes, outdoor equipment, campers, PVC pipes, plumbing, sprinkler systems, doors, seams, vents, air ducts, HVAC systems and other projects, which needs permanent waterproof sealing, works both outdoor and indoor for many years.
  • EASY TO USE: : LLPT Aluminum Butyl Sealant Tape delivers easy molding and instant adhesion to the surface of object; simply clean and dry the surface first for better bonding and release the butyl tape to areas you want to seal with proper press all around the tape; the best installation temperature is around 10 Celsius degree, to low will make the tape stiffer which might need a little bit longer time for molding.
  • WORKING PATTERNS: LLPT Butyl Sealant Tape is suitable to be use on brick, concrete, glass, fiberglass, wood, coated or uncoated metals, plastic, rubber at tight corners, unusual curves, uneven and most jagged surfaces; reliably shut off wind, water, dust, oil, grease, vapor, moisture, corrosive chemical and other leakages; never use this tape directly to wet and greasy objects, which might damage the bonding, read the bullet points before your application to complete a professional sealing job.
  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with well protected package. Search on Amazon for other LLPT tapes like PET Repair Tape, Woodworking Tape, Aluminum Foil Tape, Foam Tape, Black/Gray/Clear Acrylic Mounting Tape, Duct Tape, Silicone Tape, Caulking Tape, Gaffer Tape and so on.

What To Look For Choosing The Best 3 Inch Roof Flashings

Before choosing a 3 inch roof flashings, you should take the following considerations into account.

flashings for a 3 inch roof 1. Get a flashings that are of the right size and type for your property. 2. Use a looking for a specific type of flashings, such as those made from PVC or metal. 3. Compare the prices of the different types of flashings available on the market. 4. Make sure to order your flashings before it becomes too late, and don’t miss out on any great opportunities because of it.

Related Frequently Asked Questions

What Size Are Roof Flashings?

The size of flashings on a roof are typically four inches x six inches.

How Thick Should Flashing Be?

How thick should flashing be? It depends on the location and time of year. Generally, it is safe to flash in structures that are between 2-6 inches thick, but there is no one answer for this question. Some people might prefer 2 or 3 inches of thickness, while others might prefer a thick film that is still safe for complexulatory events.

What Is The Best Flashing For Roofs?

The best flashing for roofs is the Flashing24 service.

What Are The Different Types Of Roof Flashing?

Rooftop flashing is a process of adding paint, typically it goes on as a layer above the dirt, every other day and god knows how many hours after the job is completed. It makes the surface more visible in theoad and helps to keep the rain off of it.

Final Thoughts

If you’re looking for warranted, reliable and affordable 3 inch roof flashings, then you’ll want to check out Best Three Inch Roof Flashings. These films are made from a variety of materials, including cloth, plastic, and metal, so they’re durable and efficient. Plus, the safe and accurate printing of 3 inces is never required – these films are also safe for demolished buildings – making them an effective choice for any building project.