Skip to content

10 Best Camera Cage For Blackmagic Pockets Of 2022

cine camera A camera cage is a metal frame that attaches to the camera and provides a variety of mounting points for attaching accessories. This makes it easier to hold the camera steady, and also provides protection from knocks and bumps. Camera cages are available for a variety of different cameras, including the Blackmagic Pocket Cinema Camera.

Which Are The Best Camera Cage For Blackmagic Pockets From Our Choice

If you don’t have enough time, check out this shortlist of the best camera cage for blackmagic pockets and choose the one you like the most.

10 Best Camera Cage For Blackmagic Pockets People Love In 2022: In Depth Features

Bestseller No. 1
[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203
  • Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer
  • 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching
  • 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc
  • 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting
  • 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K
Bestseller No. 2
MAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K
  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K . This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.
  • Multiple mounting interfaces.This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories.
  • T5 SSD holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws.
  • It consists of a cage with a Top handle and a T5 SSD holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories.
Bestseller No. 3
MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K
  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.【Not for 6K Pro!】
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories.
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws.
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories .The handles are easy to transport and offer more convenience for low angle shooting.
Bestseller No. 4
[Updated] SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K - KCVB2419
  • 【ORIGINAL DESIGN】SMALLRIG Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K
  • 【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches
  • 【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft
  • 【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. This is a basic and light handheld kit for BMPCC 4K & 6K users
  • 【TOP RECOMMENDATION】When working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842
Bestseller No. 5
SmallRig BMPCC 4K/6K Half Cage Compatible with Blackmagic Pocket Cinema Camera 4K/6K(Old Version) CVB2254
  • 【FOR BMPCC 4K】BMPCC 4K/6K SMALLRIG half cage 2254 is a half cage which provides extension possibility for BMPCC 4K/6K Camera. It is lighter than SMALLRIG cage 2203. It leaves the camera original grip completely exposed and would not affect your handhold experience
  • 【ANTI-TWIST】Secured the camera with two 1/4'' screws on the top and bottom of the cage. Two additional detachable locating pins prevent camera deflection. Features rubber cushions on the bottom that increase the friction between the cage and the camera
  • 【NATO RAIL】SMALLRIG 2254 bmpcc cage The built-in NATO rails are on the top and left side, which allows you to attach SMALLRIG handle 1955 for handhold shooting. You can also attach a SMALLRIG magic arm 2071 to connect a monitor
  • 【VERSATILE INTERFACE】The cage features multiple 1/4 and 3/8 threaded holes. Two 3/8 locating holes for ARRI standard are on the top and left side which allow you to connect SMALLRIG handle 2165 and magic arm 2115. You can also attach a microphone through the cold shoe on the top of the cage
  • 【RELATED ACCESSORIES】SMALLRIG Lens Adapter Support 2247 can be fixed on SMALLRIG Cage 2254 and keep your lens stable. When working with T5 SSD, you could fix it to the top left corner of cage 2254 with SMALLRIG Mount 2245, and lock cable plugs with SMALLRIG HDMI & USB-C Cable Clamp 2246
Bestseller No. 6
SmallRig Full Cage Compatible with BMPCC 6K Pro Only for Blackmagic Pocket Cinema Camera 6K Pro, Built-in NATO Rail & Cold Shoe Mount - 3270
  • 【ONLY FOR BMPCC 6K PRO】SmallRig Full Cage 3270 is specially designed for BMPCC 6K pro. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. It fits the body perfectly, hence a comfortable grip experience.
  • 【ANTI-TWIST FUNCTION】Highly secure via a 1/4"-20 screw on the top and two on the bottom to prevent wiggles and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 300g, the cage is made of aluminum alloy, with matte surface and strong oxygen resistance.
  • 【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Quick Release Nato Rail 1409 and Smallrig Top Handle 2362, etc. Bottom Slot for Samsung T5/7 SSD and suits HDMI & USB-C cable clamp to ensure stability and smooth data transmission while shooting.
  • 【FEATURED RECOMMENDATIONS】It could attach Swivel and Tilt Adjustable Mount/Holder 2903 & 2904 for the monitor. Locating holes for ARRI on the top are compatible with Top Handle 2165 for handheld shooting, or it could be mounted with NATO Rail Handle 2270 & 2187 for better shooting. It could be mounted with HDMI & USB-C Cable Clamp 3271 and T5/7 SSD Mount 3272 to improves compactness.
  • 【BOTTOM STRUCTURE】SmallRig Cage 3270 incorporates multiple threaded holes on the bottom to attach Quick Release Plates 1280 & 2146 and RS2 stabilizer and a built-in spanner for easy disassembly.
Bestseller No. 7
Tilta Camera Cage TA-T01-B-G BMPCC 4K 6K Blackmagic Pocket Cinema Camera 6K Rig Tilta Gray (Basic Kit)
  • Note: This cage do not fit with BMPCC 6k pro. This “full” camera cage provides complete protective armor for the BMPCC 4K and 6K camera body while providing several 1/4”-20 and 3/8”-16 mounting points as well as three cold shoe mounting points.
  • The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.
  • A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.
  • The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.
Bestseller No. 8
MAGICRIG Camera Cage for Blackmagic Pocket Cinema Camera BMPCC 4K & 6K, with NATO Top Handle T5 T7 SSD Mount HDMI Cable Clamp 15MM Rod Clamp
  • 【Only for BMPCC 4K / 6K】Exclusive for the New BlackMagic Pocket Camera 4K /6K Version.The camera cage kit contains a cage, a NATO top handle , a SSD holder, a HDMI cable clamp and a 15MM rod clamp. Allow access all the buttons, no block LED screen , battery, card slots, expansion ports.
  • 【Multiple Mounting Interfaces .】The cage is equipped with multiple 1/4'' and 3/8'' screw holes.Built-in NATO rail on the top and left and right sides. Built-in a cold shoe on the top of the cage. Allow you to mount more accessories.in addition,the top and bottom are locked camera with 1/4" screws, there are additional locating pins and rubber pads on the bottom plate to prevent twisting and scratching.
  • 【NATO Top Handle Grip】The top of the handle has built-in 2 cold shoe and an Arri locating hole , allow to mount microphone, flash, monitor, etc. The handle can be adjusted back and forth to provide a comfortable grip.
  • 【T5/T7 SSD Mount Holder】The SSD card clamp dedicated to the installation of Samsung T5/T7 SSD, Compatible with SanDisk SSD, for Bmpcc 4K /6K/6K PRO camera.In addition,comes with a standard cold shoe adapter, which is convenient for you to install the SSD on the cold shoe mount of the camera cage.
  • 【HDMI Cable Clamp】The HDMI cable clamp protects the HDMI cable from being impaired or damaged, keeps the signal stable.It is fixed on the camera cage with 1/4"-20 screws.And, the bottom of the cable clamp is equipped with rubber gasket to protect the camera cage from scratches.
Bestseller No. 9
Tilta Full Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K (Tactical Gray)
  • Features three cold shoe mounting points to allow you to attach multiple accessories such as a microphone, SSD holder and top handle
  • The camera cage and top handle both feature the same unique finish that allows you to have a firm grip on your camera
  • Included allen key fits in the cage itself: The Allen key slot is sleekly integrated into the cage's design and avoids blocking the battery port as well as the camera's fan
  • Holes on the bottom of the cage allow for easy adjustments when balancing the camera onto gimbals. Alao works with the Ronin-S and Zhiyun Crane
  • The bottom of cage has two dovetail slots. These allow you to attach the side handle and baseplate simultaneously
Bestseller No. 10
SmallRig QR Half Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K (Old Version) CVB2255
  • 【HIGH CUSTOMIZATION】The QR half cage is exclusively designed for Blackmagic Design Pocket Cinema Camera 4K & 6K. The cage leaves the grip completely exposed and would not block any buttons on the camera, you are able to access not only the battery but even the SD card slot
  • 【FOR MANFROTTO 501PL】Comes with a baseplate for Manfrotto 501PL standard and locked tightly with a latch on the bottom. For tripod shooting, you can mount the baseplate to the tripod compatible with Manfrotto style when you disassemble it from the cage. Besides, it features a security knob notch protecting the plate from sliding off
  • 【PERFECT PROTECTION】Secure tightly via the 1/4’’ screw on the bottom, and two locating pins are placed to prevent from wiggling or twisting. Rubber pads for protecting camera from scratching
  • 【MOUNTING POINTS】There are plenty of mounting points on this cage, such as 1/4’’ and 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like the microphone or SmallRig Articulating Arm – 2070. Features NATO rails for quickly mounting accessories with compatible NATO clamp
  • 【FEATURED RECOMMENDATIONS】For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are the special matching accessories for Blackmagic Design Pocket Cinema Camera 4K & 6K

Criteria You Should Consider Before Purchasing The Best Camera Cage For Blackmagic Pockets

Take the following considerations into account to choose the best camera cage for blackmagic pockets that meets your needs.

There is no one-size-fits-all answer to this question, as the best camera cage for blackmagic pockets depends on your specific needs and 8) family members. However, the best camera cages for blackmagic pockets will provide you with the tools you need to protect your camera’s digital parts and data. To find the best camera cage for blackmagic pockets, we looked at the features and performance of the devices in our list. We found some of the best cages on the market and combined them with those that met our other requirements. Our findings: For video Buyers: The Nikon P6000 Camera Cage is an excellent option for video buyers, because it comes with a great video board and a variety of other features that make it easy to use. It also has a durable design that will last long in your camera’soot. For fiction buyers: The Lifford CAGE Camera Cage is a great option for fiction buyers who need to be able to hold their camera without moving it around. It also has a nice design that will last long in your camera’soot. For portrait buyers: The Godine CAGE Camera Cage is a great option for

Related Frequently Asked Questions

Is There A Cage For The Bmpcc 6K Pro?

There is a Cage for the Bmpcc 6K Pro.

What Mount Does Blackmagic Pocket Use?

The Blackmagic Pocket knife has a forestock which is mounted on a Stats housing. The Statistics housing is located beneath the left-most tools family and reverse-mounted with the other tools. It provides data on tool use and performance.

Is Blackmagic Pocket Netflix Approved?

No, Blackmagic pocket Netflix is not approved.

Is The Blackmagic Pocket Cinema Camera Worth It?

The Blackmagic Pocket Cinema Camera is a camera that is very simple to use and set up. It has a single camera control that allows you to change the mode, angle, and background+film shots. The camera also has a voice activation that makes it easy to take video and take photos with the user’s hand.

Final Verdict

The best camera Cage for Blackmagic Pocket cameras is those that are designed to protect and provide good performance from our camera. Some of the features that should be considered when buying a camera Cage for Blackmagic Pocket cameras include protecting the device from impact, history, and accidental damage; also providing good vision and sound; and being able to fail-safe if something goes wrong. We recommend you consult with a microscope Digi sparks expert in order to purchase a perfect camera Cage for Black magic Pocket cameras, as wrong things happening can happen and easily allow others to take pictures or videos that we wouldn’t be able to take because of thebracelet we have on our forehead.